Set up a newcs cardsharing server on windows

All this information is for test purpose and should only be used within your own household. No one except yourself is responsible for any damage this can cause or any law you might break. What we all need is a Dreambox of some kind. A computer with internet connection. If you have the computer in one room and the Dreambox in another room far away you will need either a long Ethernet cable or use another solution to connect your PC to your Dreambox.

Read more about Homeplugs here: HomePlug Powerline Alliance - Wikipedia, the free encyclopedia If you want to be able to handle a large number of peers you need a pc as server, more about that later. Hardware installation Not much to say here. Put your Dreambox in a suitable place by your TV. Make sure you have enough space around it to let the air circulate freely and cool down the Dreambox. Connect the cable from your satellite dish if you use a satellite dish to your Dreambox tuner. Connect the network cable to the Dreambox.

Connect power cord. Switch on. Setup your network To be able to share with another CCcam server or even many servers you need to set up an network. Either you have one from your ISP or you can set one up for yourself.

Follow this link for static ip: PortForward. You should have all information needed if you did step 4. Default port is but this can be changed in the config CCcam.

Now you need to edit cccam this is where you put your C line if you have one , if your using your own sly card you need to put the sly box boxkey in here before you can do this you need to setup your network. If your using your own sly card and want to enter in your sly box boxkey in to CCcam follow the instructions above to open CCcam. Decompress the following files from the NewCS archive to some directory: newcs.

Specify the serial port COMx on which You have a cardreader hardware installed. Also, specify the debug port for the NewCS server starts its numbering from The time now is Mark Forums Read. Remember Me? Lujdzo Senior Member. Search channels optional. If you intend to download a list of channels you do not need to search. Installing Addons Lineups, etc. Connect the power cable and turn on the decoder or set the network settings menu ; 2.

Confirm the various questions by pressing OK or the green button when prompted. Repeat the process with other AddOns that you want. You may need to restart the decoder to be performed by the menu!

First way: 1. In settings make sure it is set to the ip of the pc ie In about 10 seconds recovery should begin; Once the recovery to proceed with updating the file system via USB. Second way: 1. Set the PC a static IP eg In settings set the ip of the pc ie The update is necessary to implement all the bug fixes and new development done for the QBoxHD. There are two parts of Box that can be updated. Please read inside the FileSystem archive which version of Boot Image to use and viceversa.

What is needed The Hardware needed to update your QBox is the following: 1. PC with Windows OS. Windows XP and Windows Vista are supported. Ethernet cable can be direct or cross cable. To update the Boot Image. This is needed to maintain a stable the connection with the QBox.

Boot Update. Boot Update files have the extension. Download the latest updating software version can be downloaded from the official web site www. Choose the. QHU file. When finished a message will appear. FileSystem Update. Download the latest QBoxHD update file and make sure the file you are using has the correct extension.

Uncompress the. Using WinRar. Make sure the USB Pen is connected 6. Wait until the QBoxHD is booting up. FileSystem can be also updated via LAN. In this case follow the same procedure as the Boot Update and choose directly the. Checking Image version. To Check the Image version you are running follow the this procedure 1. Press the OK-Button to close this menu.

Look at the first line.